Kiddie Ride - looking for safety plate

Simulators, kiddie Rides, Arcade machines and redemption machines here
Post Reply
birdy59
Newbie
Posts: 4
Joined: May 27th, 2016, 9:56 am
Referred by?: Google

Kiddie Ride - looking for safety plate

Post by birdy59 »

Hi,

This is my first post on the forum. I am renovating an old muffin the mule kiddie ride and I am struggling with a few things.

1. I am trying to get hold of a safety plate that should go below the coin mech similar to this.

Image

2. I have no idea how to collect the coins. The coins just drop out of the bottom of the coin chute. What should be at the bottom similar to this ride.

Image

3. I have a very old timer that I think I can get to work ok. Would this type of ride have had sound and if it would what sort of device would it have been and can I get one anywhere?

Thanks,
Mick
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3413
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Kiddie Ride - looking for safety plate

Post by Coin Operated Group »

Is that the actual ride ? Picture 2 the hole locks like a hole for a cam lock which would hold in place a collection tray for coins
Regards Matt

www.easyvend.com
birdy59
Newbie
Posts: 4
Joined: May 27th, 2016, 9:56 am
Referred by?: Google

Re: Kiddie Ride - looking for safety plate

Post by birdy59 »

No it is not the actual ride I am working on but the coin mech post is exactly the same.

Thanks,
Mick
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3413
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Kiddie Ride - looking for safety plate

Post by Coin Operated Group »

Would say a collection tray should sit inside the post then , with some sort of cam lock

Nigel Flint vending may be able to help more or point you in the right direction , I know he likes old machines
Regards Matt

www.easyvend.com
birdy59
Newbie
Posts: 4
Joined: May 27th, 2016, 9:56 am
Referred by?: Google

Re: Kiddie Ride - looking for safety plate

Post by birdy59 »

Thanks Matt

How can I contact Nigel?

Mick
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3413
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Kiddie Ride - looking for safety plate

Post by Coin Operated Group »

He does pop up occasionally here , or just on him flint vending
Regards Matt

www.easyvend.com
Ade
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 852
Joined: July 6th, 2009, 7:43 pm
Area Covered: east and west midlands
Machines Used: kiddie rides, sweet and toy vend
Referred by?: M.Slater
Location: tamworth & b`ham + surrounding areas

Re: Kiddie Ride - looking for safety plate

Post by Ade »

my god heres a blast from the past, the coin chute as matt said requires a plate and a pin went through holding it in place with a padlock, you will be hard pushed getting any parts for this ride due to how old it is, if anyone has the parts it will be jolly roger in skegness


Ade
birdy59
Newbie
Posts: 4
Joined: May 27th, 2016, 9:56 am
Referred by?: Google

Re: Kiddie Ride - looking for safety plate

Post by birdy59 »

Thanks Ade, is the best way of contacting him to use the telephone number on his website or do you have an email address?
Ade
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 852
Joined: July 6th, 2009, 7:43 pm
Area Covered: east and west midlands
Machines Used: kiddie rides, sweet and toy vend
Referred by?: M.Slater
Location: tamworth & b`ham + surrounding areas

Re: Kiddie Ride - looking for safety plate

Post by Ade »

phone the 0845 100 4000 speak to gail

Ade
Post Reply