I have a shelf selling £1 large chocolate bars but they were slipping under the spirals so I took the shelf out and turned the spirals back.
I put the shelf back in, reconnected same as before but now nothing on the shelf will vend but if I test a selection on the B shelf, they will vend as normal but it also starts pushing out my E shelf products, E is the shelf I took out.
Also testing A2 will turn the A0 spirals but only halfway around. A2 will vend the product as normal.
Ideas anyone? I'm not experienced with snack machines.
Polyvend 453 snack problem
-
Lee@BIGBAPS
- Coin Op Group Valued Contributor
- Posts: 91
- Joined: Mon Mar 30, 2015 6:36 pm
- Referred by?: Google
-
Lee@BIGBAPS
- Coin Op Group Valued Contributor
- Posts: 91
- Joined: Mon Mar 30, 2015 6:36 pm
- Referred by?: Google
Re: Polyvend 453 snack problem
Fixed it.
There's 11 pins on the PC board for the shelf but 12 openings on the wiring from the shelf I connected it wrong.
There's 11 pins on the PC board for the shelf but 12 openings on the wiring from the shelf I connected it wrong.
-
Coin Operated Group
- Site Admin
- Posts: 3331
- Joined: Tue Jan 13, 2009 9:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham