Karls phone number

Posts about Snack/Drink vending machines
Post Reply
isladeiona
Coin Op Group Valued Contributor
Coin Op Group Valued Contributor
Posts: 94
Joined: June 7th, 2010, 7:59 am
Area Covered: Central Scotland
Machines Used: Combo, Can, Bottles, Snacks
Referred by?: Google
Contact:

Karls phone number

Post by isladeiona »

Hi does anyone have a guy called Karls phone number, I've lost it and am looking for spare parts....spacers for a vendo 189 if anyone can help. Thx
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3414
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Karls phone number

Post by Coin Operated Group »

0113-240 1788 vendo uk should be able to help. What do you need spacers for?
Regards Matt

www.easyvend.com
isladeiona
Coin Op Group Valued Contributor
Coin Op Group Valued Contributor
Posts: 94
Joined: June 7th, 2010, 7:59 am
Area Covered: Central Scotland
Machines Used: Combo, Can, Bottles, Snacks
Referred by?: Google
Contact:

Re: Karls phone number

Post by isladeiona »

Thanks Matt, I need the spacers so that I can make the can rows hold double the amount of cans and place them 2 deep.
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3414
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Karls phone number

Post by Coin Operated Group »

You just move the back plate forwards dont you?
Regards Matt

www.easyvend.com
isladeiona
Coin Op Group Valued Contributor
Coin Op Group Valued Contributor
Posts: 94
Joined: June 7th, 2010, 7:59 am
Area Covered: Central Scotland
Machines Used: Combo, Can, Bottles, Snacks
Referred by?: Google
Contact:

Re: Karls phone number

Post by isladeiona »

Hi Matt,

The spacers ( at least thats what I was told they were called) are needed so that they catch a can and allow the other one to drop.

I have another identical machine so was able to do it on that one but this machine has the spacers missing.
Labelled C on the bottom right of diagram attached.

Thanks for all your help.
You do not have the required permissions to view the files attached to this post.
Post Reply