Snaky giving comes error on 7000 coin mech

Post by **SPVending** » Thu Oct 03, 2019 1:06 pm

Snaky commes error on 7000 coin mech it is on exec,tried on mdb but no power to it mech does not light up at all
Anyone had this problem.
Thanks Martin

Post by **Coin Operated Group** » Thu Oct 03, 2019 8:24 pm

You probably have jumper settings and menu settings wrong

Post by **Coin Operated Group** » Thu Oct 03, 2019 8:25 pm

IF you don't change them both it wont work

Post by **SPVending** » Fri Oct 04, 2019 2:59 pm

How do you change jumper settings and what do you change in setting?

Post by **Coin Operated Group** » Sun Oct 06, 2019 3:14 pm

Change jumpers on motherboard all 4 to opposite side

In tech settings coin handling change to mdb

Post by **SPVending** » Thu Oct 10, 2019 2:22 pm

Thanks working ok until today now saying machine out of order.
Any ideas

Fri Oct 11, 2019 12:03 pm

if you press # or * key (one of two) it will tell you the error

Coin Operated Group

Snaky giving comes error on 7000 coin mech

Snaky giving comes error on 7000 coin mech

Re: Snaky giving comes error on 7000 coin mech

Re: Snaky giving comes error on 7000 coin mech

Re: Snaky giving comes error on 7000 coin mech

Re: Snaky giving comes error on 7000 coin mech

Re: Snaky giving comes error on 7000 coin mech

Re: Snaky giving comes error on 7000 coin mech