Polyvend 453 shelf issues

Got a vending technical question you need answered?
Post Reply
connorsolutions
Newbie
Posts: 2
Joined: August 17th, 2012, 12:32 pm
Machines Used: polyvend 453
Referred by?: google

Polyvend 453 shelf issues

Post by connorsolutions »

Hi,

Im after a bit of help with regards to a Polyvend 453 machine.

Upon installation of the machine and set up,I have found that the top three shelves will vend correctly, however the lower three shelves will not vend at all.

Shalf D does is not recognised, E and F keep falshing on the keypad as "make another selection".

I know that this machine is an old model, but I have been lumbered with it and had to install it.

Any help is much appreciated.


Darron
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3413
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Polyvend 453 shelf issues

Post by Coin Operated Group »

If you press machine configuration, press edit until it is set to

cnf1.chilled

Next after exiting press product config again and scroll down with down arrow until it shows

A.B.C.D.E.F or maye A.B.C in your case if so press the appropriate key ie D,E & F to reactivate shelf.

Try these and let me know how you get on.
Regards Matt

www.easyvend.com
connorsolutions
Newbie
Posts: 2
Joined: August 17th, 2012, 12:32 pm
Machines Used: polyvend 453
Referred by?: google

Re: Polyvend 453 shelf issues

Post by connorsolutions »

Cheers Matt, tried what you suggested and it has worked, much apprecieate the help.

Darron
Post Reply