sweet tower problem

Got a vending technical question you need answered?
glennborthwick
Coin Op Group Master
Coin Op Group Master
Posts: 450
Joined: January 20th, 2009, 9:38 pm
Area Covered: devon dorset somerset
Machines Used: bulk tower toy condoms

Re: sweet tower problem

Post by glennborthwick »

by the way you will be amazed how much easier a coin mech goes back in if you turn the machine upside down
dorsetvending
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 800
Joined: February 7th, 2009, 5:39 pm
Area Covered: Dorset/Somerset/Wiltshire
Machines Used: Bulk/Towers/Pringles
Referred by?: Yes brother - Glenn Borthwick
Location: Dorset, Somerset, Devon

Re: sweet tower problem

Post by dorsetvending »

Be an interesting specialist subject in the Mastermind seat.....
Vendingwarehouse
Coin Op Group Elite
Coin Op Group Elite
Posts: 1046
Joined: January 15th, 2009, 9:05 pm
Area Covered: Southern Ireland
Machines Used: Towers, Pringles, Condoms, Capsules, Pokers,Toys
Referred by?: 1

Re: sweet tower problem

Post by Vendingwarehouse »

Dead right Gavin. lol "you have 3 minutes to answer as many questions as possible on nipple tweaking".
dorsetvending
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 800
Joined: February 7th, 2009, 5:39 pm
Area Covered: Dorset/Somerset/Wiltshire
Machines Used: Bulk/Towers/Pringles
Referred by?: Yes brother - Glenn Borthwick
Location: Dorset, Somerset, Devon

Re: sweet tower problem

Post by dorsetvending »

It's alot easier to get a few quid out of those kids who fiddle your machines - You just turn them upside them and their pocket money drops out lol
KASE
Coin Op Group Apprentice
Coin Op Group Apprentice
Posts: 39
Joined: October 17th, 2011, 5:15 pm
Area Covered: Wales Dorset Hampshire
Referred by?: google

Re: sweet tower problem

Post by KASE »

I was laughing when typing nipple circles, but felt it was childish and immature to be amused by it - glad to see people on here have the same sense of humour.
PGBrew
Coin Op Group Master
Coin Op Group Master
Posts: 740
Joined: August 10th, 2009, 8:47 am
Area Covered: London & Home Countie
Machines Used: Bulk, Tower, Pringles & various toys
Referred by?: Sarah Hickman
Location: London & Home Counties North of Thames

Re: sweet tower problem

Post by PGBrew »

There are three lugs on the nipple circle where the clear plactic rings slot in, sometimes the securing protusions on the inside of the rings break off and get wedged in these lugs. To prevent the problem happening again it is important to clear out the debris from these lugs and also swap the ring over with the one above.
Pete
Post Reply