Looking For Service Engineers

Vending related news
Post Reply
David@Perform
Coin Op Group Apprentice
Coin Op Group Apprentice
Posts: 31
Joined: February 28th, 2012, 5:52 pm
Area Covered: Full UK Coverage
Machines Used: Washroom, Sweets, tubz vending, SWP, Discapa, Toys, Crane
Referred by?: Google
Location: Tamworth
Contact:

Looking For Service Engineers

Post by David@Perform »

Good Morning - We have just put a couple of jobs on Jobcentre Plus and I thought I'd ask on the forum. We are looking to recruit two service engineers. One in the Cheshunt area for front of house and washroom machines. The other covering Berkshire, Hampshire & Dorset looking after just front of house. Details as below for each post.

VENDING MACHINE SERVICE ENGINEER
Job No:WAX/40194
SOC Code:5223
Wage: £17,000 per annum
Hours: 40 HOURS MONDAY TO SUNDAY, DAYS
Location: Cheshunt, Waltham Cross, Herts EN8
Duration: Permanent
Date posted: 19 July 2012
Description: Immediate, permanent vacancy covering an area from Watford (west), down to central London (South), Luton (North) and Chelmsford (East). The candidate will be ideally based in the Cheshunt/ Harlow area, although applications considered from anyone inside the geographic area. Duties include, servicing, collecting from, installing & repairing Toy and wash room vending machines. Typically these machines are in the Pub / Supermarket sector. The successful applicant will be responsible for balancing cash on a daily basis and banking it also. Machines are mainly mechanical, but some are electronic so some experience in this type of field is an advantage. Full driving licence essential as well as some computer skills as all input is via a hand-held PDA device.

VENDING MACHINE SERVICE ENGINEER
Job No: FAR/51374
SOC Code: 5223
Wage: £17,000 per annum
Hours: 40 HOURS MONDAY TO SUNDAY, DAYS
Location: Farnborough, Hampshire GU14
Duration: Permanent
Date posted: 24 July 2012
Description: Immediate, permanent vacancy covering an area from Salisbury (West) Reading (North) Gatwick (East) Southampton, Portsmouth, Bournemouth (South). The candidate will be ideally based in the Farnborough / Aldershot area, although applications considered from anyone inside the geographic area. Duties include, servicing, collecting from, installing & repairing. Toy vending machines. Typically these machines are in the Pub / Supermarket sector. The successful applicant will be responsible for balancing cash on a daily basis and banking it also. Machines are mainly mechanical, but some are electronic so some experience in this type of field is an advantage.Full driving licence essential as well as some computer skills as all input is via a handheld PDA device.

You can apply for either job by sending a CV/written application to Gary Cantelo at Perform Marketing Ltd, gary@performmarketing.co.uk.
Ade
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 852
Joined: July 6th, 2009, 7:43 pm
Area Covered: east and west midlands
Machines Used: kiddie rides, sweet and toy vend
Referred by?: M.Slater
Location: tamworth & b`ham + surrounding areas

Re: Looking For Service Engineers

Post by Ade »

£17000, for a 40 hour week :50: good luck with that


Ade
David@Perform
Coin Op Group Apprentice
Coin Op Group Apprentice
Posts: 31
Joined: February 28th, 2012, 5:52 pm
Area Covered: Full UK Coverage
Machines Used: Washroom, Sweets, tubz vending, SWP, Discapa, Toys, Crane
Referred by?: Google
Location: Tamworth
Contact:

Re: Looking For Service Engineers

Post by David@Perform »

We're very lucky thanks Ade!
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3414
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Looking For Service Engineers

Post by Coin Operated Group »

Thanks for the post it is appreciated. :thumbup:

£8+ an hour seems reasonable to me.
Regards Matt

www.easyvend.com
Rossi fan
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 821
Joined: July 30th, 2009, 9:28 pm
Area Covered: North Licolnshire, Doncaster
Machines Used: Tower
Referred by?: Matt Slater. E-bay member Slater210
Location: Scunthorpe

Re: Looking For Service Engineers

Post by Rossi fan »

In this climate, it a good job for someone &17k is a reasonable wage.

Paul
cranedoctor
Coin Op Group Regular
Coin Op Group Regular
Posts: 140
Joined: January 30th, 2009, 6:21 pm
Area Covered: none
Machines Used: all
Location: East Coast Lincolnshire
Contact:

Re: Looking For Service Engineers

Post by cranedoctor »

theres a lot of service engineers on less than 17K, some of the majors pay 14 - 15K
glennborthwick
Coin Op Group Master
Coin Op Group Master
Posts: 450
Joined: January 20th, 2009, 9:38 pm
Area Covered: devon dorset somerset
Machines Used: bulk tower toy condoms

Re: Looking For Service Engineers

Post by glennborthwick »

why not sub it out to people on here as an hourly basis. For example I know three machines of performs are currently out of order in North Devon as I share some sites/shop in Tescos. Wouldnt take much to clear the coin jams.
Ade
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 852
Joined: July 6th, 2009, 7:43 pm
Area Covered: east and west midlands
Machines Used: kiddie rides, sweet and toy vend
Referred by?: M.Slater
Location: tamworth & b`ham + surrounding areas

Re: Looking For Service Engineers

Post by Ade »

good idea, pay an operator on here by the hour, name site and nearest engineer could go


Ade
Rossi fan
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 821
Joined: July 30th, 2009, 9:28 pm
Area Covered: North Licolnshire, Doncaster
Machines Used: Tower
Referred by?: Matt Slater. E-bay member Slater210
Location: Scunthorpe

Re: Looking For Service Engineers

Post by Rossi fan »

I doubt that most on here operate the big machines that large companies have, but that is not a big issue. However, if a site 100 miles away from base hits a problem a couple of days after it was refilled, it would be costly to send someone out. Why not consider subbing one person per region and if necessary, which may save money, or go the whole hog and sub out the whole operation.

Paul
dorsetvending
Coin Op Group Grand Master
Coin Op Group Grand Master
Posts: 800
Joined: February 7th, 2009, 5:39 pm
Area Covered: Dorset/Somerset/Wiltshire
Machines Used: Bulk/Towers/Pringles
Referred by?: Yes brother - Glenn Borthwick
Location: Dorset, Somerset, Devon

Re: Looking For Service Engineers

Post by dorsetvending »

May work for me
Post Reply