Start Up Costs

Non vending or coin operated related chat goes here
Post Reply
Tufty
Coin Op Group Regular
Coin Op Group Regular
Posts: 104
Joined: November 7th, 2017, 11:03 am
Referred by?: Barbara
Location: South Lanarkshire

Re: Start Up Costs

Post by Tufty »

Hi Pablo,

I am totally new to vending and just wanted to thank you for taking the time to write this. Been hugely helpful!

I have just bought 11 towers second hand,a couple are sited and hopefully the rest will be before too long.

Am I right thinking you are Ayrshire based? I'm not a million miles away in South Lanarkshire.
radical.richard
Coin Op Group Regular
Coin Op Group Regular
Posts: 156
Joined: August 13th, 2017, 5:24 pm
Area Covered: ST
Referred by?: Barbara

Re: Start Up Costs

Post by radical.richard »

Style wrote:Central2vend,

I have two towers next to each other in the same pub. Both stocked exactly the same. The one on the left always outsells the one on the right, neither have labels!
Swap them round and see if you get the same results.
Andy

Location Location Location

I have this with trade counters, I have a couple right on the counter that sell well, other in the 'coffee area' that hardly sell at all
PabloV8Haggis
Coin Op Group Regular
Coin Op Group Regular
Posts: 194
Joined: October 22nd, 2017, 1:14 pm
Area Covered: Scotland
Machines Used: Towers
Referred by?: PabloV8

Re: Start Up Costs

Post by PabloV8Haggis »

LOL!

Had a tower in Glasgow, could not remember were we put it!

Got a call two weeks ago as number was on the back, asked if we could remove it! And it was empty, new owners so they did not want it.
It had been there for at least two years!
Brought tears to my eyes....... of laughter!
PabloV8Haggis
Coin Op Group Regular
Coin Op Group Regular
Posts: 194
Joined: October 22nd, 2017, 1:14 pm
Area Covered: Scotland
Machines Used: Towers
Referred by?: PabloV8

Re: Start Up Costs

Post by PabloV8Haggis »

We now have a complete fleet of towers with no stickers, we intend to keep it that way, the glue used on some stickers is a nightmare to remove, and I have used solvents stronger than sticky stuff remover.
Our machines look better for it, customers can see what is in the tubz vending so no need for a reminder. Has it increased sales, yes in some sites consistently as the machines look so clean.
Pablo
User avatar
Snackmore
Site Admin
Site Admin
Posts: 1466
Joined: April 26th, 2011, 7:36 pm
Area Covered: Leicestershire
Referred by?: Google search
Location: Leicestershire and North Northamptonshire

Re: Start Up Costs

Post by Snackmore »

To be fair you cant go wrong with Hurley's internal stickers, they are easy peel and look great
Steve

Snackmore Vending

Fully managed vending services

Drinks | Snacks | Sweets | Toys | Rides | Washroom

www.snackmore.co.uk 

 

 
PabloV8Haggis
Coin Op Group Regular
Coin Op Group Regular
Posts: 194
Joined: October 22nd, 2017, 1:14 pm
Area Covered: Scotland
Machines Used: Towers
Referred by?: PabloV8

Re: Start Up Costs

Post by PabloV8Haggis »

Do you have to strip the machines down to change the stickers?
Are the stickers placed on the top ring?

I have several hundred segments with stickers on them in my garage awaiting attention/sticker removal!

My towers now look like brand new, do not have stickers on them and to be fair, look better for it. What people do with machines is of course up to them alas, the problems encountered in removing these critters goes without saying and, the norm is for operators to keep slapping a sticker on top of a previous item because they have had to change said item for something else!
They are a nightmare.
Cheers
Paul
Style
Coin Op Group Elite
Coin Op Group Elite
Posts: 1154
Joined: June 1st, 2012, 11:00 pm
Area Covered: Milton Keynes
Machines Used: Sweet towers, toys, beavers, pringles
Referred by?: random

Re: Start Up Costs

Post by Style »

No stickers on any of mine.
User avatar
Snackmore
Site Admin
Site Admin
Posts: 1466
Joined: April 26th, 2011, 7:36 pm
Area Covered: Leicestershire
Referred by?: Google search
Location: Leicestershire and North Northamptonshire

Re: Start Up Costs

Post by Snackmore »

I undo top bolt and place on 2nd ring down
Steve

Snackmore Vending

Fully managed vending services

Drinks | Snacks | Sweets | Toys | Rides | Washroom

www.snackmore.co.uk 

 

 
PabloV8Haggis
Coin Op Group Regular
Coin Op Group Regular
Posts: 194
Joined: October 22nd, 2017, 1:14 pm
Area Covered: Scotland
Machines Used: Towers
Referred by?: PabloV8

Re: Start Up Costs

Post by PabloV8Haggis »

Ridiculous!
So I can imagine the scene!
On customers premises, remove 'top nut', and flaming nut falls down to bottom (go on tell me it has never happened), the resultant being on premises you have to completely dismantle said machine to retrieve nut and rebuild. Like some of my Customers would be happy with that!
I was okay with stickers until I quickly realised that it was all to easy to slap another sticker on top of a sticker, that was okay until they became unsightly, or defaced by kids etc.
I got my idea of a sticker free tower zone from Style two years ago and, I guess I have been removing said segments for that amount of time. Nah, bad idea and like I said towers look much better and cleaner without.
Cheers
Pablo
radical.richard
Coin Op Group Regular
Coin Op Group Regular
Posts: 156
Joined: August 13th, 2017, 5:24 pm
Area Covered: ST
Referred by?: Barbara

Re: Start Up Costs

Post by radical.richard »

Cant help but agree, how are you all with the big A4 size charity stickers plastered all over the towers, looks a complete mess to me, especially when they wrinkle, much better with the smaller credit card sized ones
Post Reply