Plastic Segments

Got a vending technical question you need answered?
Post Reply
fitzgerm
Coin Op Group Valued Contributor
Coin Op Group Valued Contributor
Posts: 65
Joined: July 26th, 2010, 3:04 pm
Area Covered: South West Birmingham
Machines Used: Tower
Referred by?: Brian Choice Vending

Plastic Segments

Post by fitzgerm »

Can anyone confirm the folloing below:

I understand that Clenports are differnet size to Chinese-can anyone confirm if tubz vending/Snack A Can are the same segments?

Thanks

Malcolm
Eatsweets
Coin Op Group Regular
Coin Op Group Regular
Posts: 134
Joined: June 3rd, 2011, 10:36 am
Area Covered: Hertfordshire and essex
Machines Used: Tower vending
Referred by?: Phil hollingdale

Re: Plastic Segments

Post by Eatsweets »

I think that as long as the top ring and the bottom ring are the right rings for the machine then the rest in the middle don't matter, I am sure it's been tried and worked before.

One of the hardened vending guys will be able to confirm.

Regards
Rob
sadler2886
Coin Op Group Veteren
Coin Op Group Veteren
Posts: 245
Joined: October 17th, 2009, 6:55 am
Area Covered: wv,dy,ws
Machines Used: tower
Referred by?: internet
Location: wolverhampton,dudley,walsall

Re: Plastic Segments

Post by sadler2886 »

That is correct.

Regards
Rich
User avatar
choice vending
Coin Op Group Veteren
Coin Op Group Veteren
Posts: 240
Joined: January 20th, 2009, 5:39 pm
Area Covered: walsall, north bham, A5 area
Machines Used: towers, bulk vendors, kiddies rides, football tabl
Location: Walsall, Bham, tamworth, cannock,and surrounding areas in the West Midlands

Re: Plastic Segments

Post by choice vending »

You will also need to use the correct dimple ring to match teh machines and the segments on the bottom segment. 12mm dimples on the chinese machines with the 3 notches been the thin notches, and 18mm dimples on the clemports with the 3 fatter notches
Post Reply