I've got 4 lids for towers that won't fit...why? They seem to have locks which are to short to reach the black plastic "c" shaped retainer on top of the central rod.
When you turn the key they come to rest on top of the "c", hence the lid can be lifted straight off again!
Anyone know an answer?
Cliff
Tower lids
-
Coin Operated Group
- Site Admin
- Posts: 3415
- Joined: January 13th, 2009, 10:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
- Contact:
-
Rossi fan
- Coin Op Group Grand Master
- Posts: 821
- Joined: July 30th, 2009, 9:28 pm
- Area Covered: North Licolnshire, Doncaster
- Machines Used: Tower
- Referred by?: Matt Slater. E-bay member Slater210
- Location: Scunthorpe
Re: Tower lids
Cliff,
The lid and black plastic segment must marry. You need to look at the other towers you have, find out which ones they fit and then find matching black segments.
Paul
The lid and black plastic segment must marry. You need to look at the other towers you have, find out which ones they fit and then find matching black segments.
Paul
-
choice vending
- Coin Op Group Veteren
- Posts: 239
- Joined: January 20th, 2009, 5:39 pm
- Area Covered: walsall, north bham, A5 area
- Machines Used: towers, bulk vendors, kiddies rides, football tabl
- Location: Walsall, Bham, tamworth, cannock,and surrounding areas in the West Midlands
Re: Tower lids
The black thingymajig on the top is the wrong one.
clemport small black thingmajig with flat lid key
chinese large black thingmajig with round lid key
clemport small black thingmajig with flat lid key
chinese large black thingmajig with round lid key
-
Vendingwarehouse
- Coin Op Group Elite
- Posts: 1046
- Joined: January 15th, 2009, 9:05 pm
- Area Covered: Southern Ireland
- Machines Used: Towers, Pringles, Condoms, Capsules, Pokers,Toys
- Referred by?: 1
Re: Tower lids
It still shouldn't sit on top of the black c segment . If it actually turns the key there is something else wrong. The above posts are right you have to marry them up but they are close enough that the key shouldn't turn unless the clasp has gone down thru the c segment.