Polyvend 453 Spirals.

Got a vending technical question you need answered?
Post Reply
JWadie
Newbie
Posts: 1
Joined: February 8th, 2018, 1:09 am
Referred by?: Google

Polyvend 453 Spirals.

Post by JWadie »

I'm looking at purchasing one of these machines from ebay, I intend on using the bottom 2 shelves for cans & bottles, however I realise that I may have to replace the spirals to do this.

I found a manual here http://www.univendingmexico.com/archivo ... al-GPL.pdf which lists the relevant part numbers, I'm assuming I may need either an 8 capacity spiral or a 10, but either way I'm not able to find these anywhere.

This would be my first machine so I'm quite new to this, but would spirals from other models be compatible?
User avatar
Snackmore
Site Admin
Site Admin
Posts: 1466
Joined: April 26th, 2011, 7:36 pm
Area Covered: Leicestershire
Referred by?: Google search
Location: Leicestershire and North Northamptonshire

Re: Polyvend 453 Spirals.

Post by Snackmore »

All Crane spirals should fit but I would look at buying a machine as spares, they are an old machine now so should be many out there
Steve

Snackmore Vending

Fully managed vending services

Drinks | Snacks | Sweets | Toys | Rides | Washroom

www.snackmore.co.uk 

 

 
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3413
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Polyvend 453 Spirals.

Post by Coin Operated Group »

about 10 pound each spiral,but as Steve says, can get a 2nd hand machine for same price.

Also the snack chiller units don't get temperature as low as dedicated cold machines, compressors cant cope
Regards Matt

www.easyvend.com
Post Reply