Hi,
Im after a bit of help with regards to a Polyvend 453 machine.
Upon installation of the machine and set up,I have found that the top three shelves will vend correctly, however the lower three shelves will not vend at all.
Shalf D does is not recognised, E and F keep falshing on the keypad as "make another selection".
I know that this machine is an old model, but I have been lumbered with it and had to install it.
Any help is much appreciated.
Darron
Polyvend 453 shelf issues
-
- Newbie
- Posts: 2
- Joined: August 17th, 2012, 12:32 pm
- Machines Used: polyvend 453
- Referred by?: google
- Coin Operated Group
- Site Admin
- Posts: 3415
- Joined: January 13th, 2009, 10:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
- Contact:
Re: Polyvend 453 shelf issues
If you press machine configuration, press edit until it is set to
cnf1.chilled
Next after exiting press product config again and scroll down with down arrow until it shows
A.B.C.D.E.F or maye A.B.C in your case if so press the appropriate key ie D,E & F to reactivate shelf.
Try these and let me know how you get on.
cnf1.chilled
Next after exiting press product config again and scroll down with down arrow until it shows
A.B.C.D.E.F or maye A.B.C in your case if so press the appropriate key ie D,E & F to reactivate shelf.
Try these and let me know how you get on.
-
- Newbie
- Posts: 2
- Joined: August 17th, 2012, 12:32 pm
- Machines Used: polyvend 453
- Referred by?: google
Re: Polyvend 453 shelf issues
Cheers Matt, tried what you suggested and it has worked, much apprecieate the help.
Darron
Darron