Hello !
I am new and having some trouble by adding the cashless card reader Ingenico SELF2000 to my NECTA Snacky RY using a Currenza C2 coin acceptor, it successfully comunicate with the bank and internet but it cannot communicate with the vending machine or the coin acceptor when it is plug to it, and if I choose a product, no price payment is sending to the card reader,
-it keep saying "please choose a product" when I plug the card reader to the MDB plug of the coin acceptor whatever I do even if I setup the coin acceptor to accept card reader trought MDB
-if I plug the card reader directly to the 6pinn MDB plug socket of the vending machine main board (J12), It only powerup the card reader that only display "COMMUNICATION IMPOSSIBLE", I tried to plug the coin acceptor to this MDB vending main board to test, but it cannot communicate also, even if I choose "MDB" protocole for coin acceptor on the vending setup, I don't know what is this MDB socket for, or if it need an update to work
-The setup is the following: The currenza C2 is plug to a 9pinn plug of the main board named J13 and working perfectly, the vending machine is set to "EXECUTIVE" communication protocole to communicate with the coin acceptor, and attached to this coin acceptor comes 1 MDB cable (maybe for full MDB vending main board direct plug), and 1 MDB "Periphery" plug (when I plug the card reader to this one it start and don't display "COMMUNICATION IMPOSSIBLE" but I get stuck to the message "Please choose a product" even if I choose a product nothing appen)
Do you have any idea of what is going on , what are those connector , please ?
Thank you for your help
Alexis
image connector plug J12 J13:
https://ibb.co/7ny8kyV
the setup snacky ry + currenza C2 + Ingenico SELF2000 when plug to main board:
https://ibb.co/RQjwm9W
when the SELF2000 is plug to the MDB cable coming from Coin acceptor and stuck to "choose a product":
https://ibb.co/51KPX8Z
NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
-
- Newbie
- Posts: 5
- Joined: Sun Sep 10, 2023 7:58 pm
- Area Covered: France, Vending snack
- Machines Used: SNACKY RY, CURRENZA C2, SELF2000
- Referred by?: google
NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
You do not have the required permissions to view the files attached to this post.
-
- Site Admin
- Posts: 3422
- Joined: Tue Jan 13, 2009 9:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
Change coin mech type to mdb in menu from executive
-
- Site Admin
- Posts: 3422
- Joined: Tue Jan 13, 2009 9:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
Change coin mech type to mdb in menu from executive
-
- Newbie
- Posts: 5
- Joined: Sun Sep 10, 2023 7:58 pm
- Area Covered: France, Vending snack
- Machines Used: SNACKY RY, CURRENZA C2, SELF2000
- Referred by?: google
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
Hello, thank you for your reply, I already tried to change coin mech type from EXECUTIVE to MDB/validator/DBV etc.. As soon as it is not in EXECUTIVE mode, the coin mech display "No communication from automate" or "no response from automate", no matter if I plug the coin mech into the 9pinn or 6 pinn MDB when its not in EXECUTIVE Mode
Any Ideas ?
Thank you for your help
Any Ideas ?
Thank you for your help
You do not have the required permissions to view the files attached to this post.
-
- Newbie
- Posts: 5
- Joined: Sun Sep 10, 2023 7:58 pm
- Area Covered: France, Vending snack
- Machines Used: SNACKY RY, CURRENZA C2, SELF2000
- Referred by?: google
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
I partially find a solution in the technical notice: in addition to set cash parameter from EXECUTIVE to MDB mode, there is 4 dip-switches to switch ON for MDB to work
the ingenico now communicate directly to the mother board, but still stuck to the message "Please choose a product" maybe technician from ingenico can help me setup or resolve this
the ingenico now communicate directly to the mother board, but still stuck to the message "Please choose a product" maybe technician from ingenico can help me setup or resolve this
You do not have the required permissions to view the files attached to this post.
-
- Site Admin
- Posts: 3422
- Joined: Tue Jan 13, 2009 9:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
what plug is plugged in from coin mech
-
- Site Admin
- Posts: 3422
- Joined: Tue Jan 13, 2009 9:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
Connect the mdb plug, switch the dip switches on board to opposite side change to ndb. Job done
-
- Site Admin
- Posts: 3422
- Joined: Tue Jan 13, 2009 9:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
make sure you switch off and on after doing this
-
- Newbie
- Posts: 5
- Joined: Sun Sep 10, 2023 7:58 pm
- Area Covered: France, Vending snack
- Machines Used: SNACKY RY, CURRENZA C2, SELF2000
- Referred by?: google
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
After try hard I found solutions and finaly SEFL2000 is working fine even with a 20yo VM:
1-Setup the VM to executive protocol (to use coin mec periph MDB feature as relay for communication from the card reader to the VM) and bought the MEI 7900 coin mec that is credit card compatible (had to check the firmware version, it is full credit card compatible starting at rev 1.27.B)
(CPI Gryfon also compatible for sure, MEI 8000 Generation also compatible)
2-Get the correct settings for the Card reader SELF2000 to activate its MDB module (otherwise it display COMMUNICATION ERROR), and generic setting correctly set to wait for the product selection and payment
1-Setup the VM to executive protocol (to use coin mec periph MDB feature as relay for communication from the card reader to the VM) and bought the MEI 7900 coin mec that is credit card compatible (had to check the firmware version, it is full credit card compatible starting at rev 1.27.B)
(CPI Gryfon also compatible for sure, MEI 8000 Generation also compatible)
2-Get the correct settings for the Card reader SELF2000 to activate its MDB module (otherwise it display COMMUNICATION ERROR), and generic setting correctly set to wait for the product selection and payment
-
- Site Admin
- Posts: 3422
- Joined: Tue Jan 13, 2009 9:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
Re: NECTA SNACKY RY - CARD READER COMMUNICATION PROBLEM
So your saying your coin mech is exec and your card reader mdb? I dont understand.
Card readers use MDB protocol, then you have coin mech MDB you cannot use dual protocol.
Glad its working though
Card readers use MDB protocol, then you have coin mech MDB you cannot use dual protocol.
Glad its working though