Azkoyen Palma only vends after 3 or 4 attempts

Got a vending technical question you need answered?
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3413
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Azkoyen Palma only vends after 3 or 4 attempts

Post by Coin Operated Group »

Initialise wont fix it. You need to set columns
Regards Matt

www.easyvend.com
User avatar
Coin Operated Group
Site Admin
Site Admin
Posts: 3413
Joined: January 13th, 2009, 10:41 am
Area Covered: Birmingham, West Midlands
Machines Used: Arcade Machines, Quiz & Big Vendors
Referred by?: myself
Location: Birmingham
Contact:

Re: Azkoyen Palma only vends after 3 or 4 attempts

Post by Coin Operated Group »

You need to set column depth for each one and then reinitialise each column. (p041) ithink
Regards Matt

www.easyvend.com
withnail
Newbie
Posts: 17
Joined: May 18th, 2022, 6:45 pm
Referred by?: Google

Re: Azkoyen Palma only vends after 3 or 4 attempts

Post by withnail »

I checked selections for each column, can't remember if I checked depth settings, will look next time I'm there.
Yes it is 041.
Think I'll also try disconnecting things like the temp sensor one by one and see if that makes any difference.
It must be something weird like that, there's more than 1 fault/symptom and they're a bit too random.
Cheers :-)
withnail
Newbie
Posts: 17
Joined: May 18th, 2022, 6:45 pm
Referred by?: Google

Re: Azkoyen Palma only vends after 3 or 4 attempts

Post by withnail »

It was the plastic gearbox housing on motor 1. It was broken on the inside causing the worm gear to jump out of position if there were any more than 6 cans in the channel. Once the gears started jumping it must have thought the channel was jammed. No idea why it was causing the other selections to behave so strangely though.
Post Reply