I bought a 8 selection Dixie narco from VendTrade a few months ago, £850 delivered, nice and clean and with a mech.
Very reliable machines, I have an old 7 selection Dixie narco does about £50 a week it hasn't had a single issue in around 6 years.
Search found 101 matches
- June 13th, 2019, 4:33 pm
- Forum: Snack/Drink Vending Machines
- Topic: Drinks machines.
- Replies: 7
- Views: 6480
- May 27th, 2019, 8:05 pm
- Forum: Snack/Drink Vending Machines
- Topic: shopper 1 fridge problem
- Replies: 3
- Views: 2829
Re: shopper 1 fridge problem
I'll check that tomorrow, I was gonna take the fridge unit out and give a check over and a clean anyway. The blower motor wasn't running, it had power going to it and it was getting extremely hot, too hot to touch but it wasn't turning. Not sure what that part actually does though it's in a strange ...
- May 24th, 2019, 9:31 pm
- Forum: Snack/Drink Vending Machines
- Topic: shopper 1 fridge problem
- Replies: 3
- Views: 2829
shopper 1 fridge problem
I still operate 2 of these old shopper 1 machines. a few times over the past couple of weeks I've got to one of them and it has had health control errors, usually failing around 7-8 degrees when it needs to be 5 degrees. It does get cold enough after I close the door though, the temperature falls qu...
- April 17th, 2019, 6:49 pm
- Forum: Snack/Drink Vending Machines
- Topic: Vendking brewer
- Replies: 1
- Views: 2091
Vendking brewer
I'm after a vendking brewer, fits on the Stentorfield machines used for freshbrew tea.
Anyone got any spares?
I can clean it up, just needs to be complete and working.
Also still after those shopper 2 parts if you have them Matt?
Anyone got any spares?
I can clean it up, just needs to be complete and working.
Also still after those shopper 2 parts if you have them Matt?
- April 13th, 2019, 11:13 am
- Forum: Snack/Drink Vending Machines
- Topic: Polyvend 453 snack problem
- Replies: 2
- Views: 2295
Re: Polyvend 453 snack problem
Fixed it.
There's 11 pins on the PC board for the shelf but 12 openings on the wiring from the shelf I connected it wrong.
There's 11 pins on the PC board for the shelf but 12 openings on the wiring from the shelf I connected it wrong.
- April 12th, 2019, 1:45 pm
- Forum: Snack/Drink Vending Machines
- Topic: Polyvend 453 snack problem
- Replies: 2
- Views: 2295
Polyvend 453 snack problem
I have a shelf selling £1 large chocolate bars but they were slipping under the spirals so I took the shelf out and turned the spirals back. I put the shelf back in, reconnected same as before but now nothing on the shelf will vend but if I test a selection on the B shelf, they will vend as normal b...
- March 28th, 2019, 10:34 pm
- Forum: Snack/Drink Vending Machines
- Topic: Cheaper parts supplier than Vendparts
- Replies: 5
- Views: 3771
Re: Cheaper parts supplier than Vendparts
It's the black plastic chute, when the coin disappears in the slot it's the first chute the coin will travel down. I think a coin got stuck so a customer jammed a screwdriver down there and snapped it up, had to take the part from a spare machine but now I need the spare machine fixing up. Also a do...
- February 22nd, 2019, 12:12 pm
- Forum: Snack/Drink Vending Machines
- Topic: Cheaper parts supplier than Vendparts
- Replies: 5
- Views: 3771
Re: Cheaper parts supplier than Vendparts
I'll have a look, thanks
- February 21st, 2019, 11:28 am
- Forum: Snack/Drink Vending Machines
- Topic: Cheaper parts supplier than Vendparts
- Replies: 5
- Views: 3771
Re: Cheaper parts supplier than Vendparts
Come on where do you buy your spares?
I suppose the cheapest way is to find an old machine going cheap and strip it for parts, only need two bits though.
I suppose the cheapest way is to find an old machine going cheap and strip it for parts, only need two bits though.
- February 19th, 2019, 8:20 am
- Forum: Snack/Drink Vending Machines
- Topic: Cheaper parts supplier than Vendparts
- Replies: 5
- Views: 3771
Cheaper parts supplier than Vendparts
Know any?
Just been quoted £115 for a shopper 2 door motor and plastic coin chute, I think around £50 would be a fairer price.
Anyone here got shopper 2 parts for sale?
Just been quoted £115 for a shopper 2 door motor and plastic coin chute, I think around £50 would be a fairer price.
Anyone here got shopper 2 parts for sale?